MPP Engineering

MARINE ENGINEERING

We carry out engine maintenance from routine services to major engine overhauls including; small, 3 cylinder, 17kw engines up to 12 cylinder, 1750 kw engines, covering manufacturers such as Yanmar, Volvo Penta, Perkins, Cummins, Iveco, MTU, MAN, Scania and Caterpillar.

We also cover all aspects of marine engineering including; hydraulic systems, hull fittings and valves. Propulsion systems including stern drives, waterjets, shaft work including prop repair and balancing. Cutlass bearings, couplings, engine mounts and vibration issues, shaft seals, anodes and earth bonding and AC and DC electrical systems.

Yacht inspection/Top end overhaul

We carried out a full gearbox upgrade to both Volvo Tamd41 engines following a gearbox failure on our customers Aqua star as the old gearbox was no longer serviceable. We also installed 2 new ZF45A gearboxes complete with new drive plates and oil coolers.

We replaced all engine mounts, new prop shafts, new cutlass bearings and sent the props off for refurbishment which included re-pitching of the props to allow for the new gearbox ratio. A full engine service was also carried out including valve clearance and the heat exchangers were removed for cleaning. Following successful sea trials the customer can now use their boat in time for the summer season.

MPP Engineering
MPP Engineering

Aqua Star gearbox failure

We carried out a full gearbox upgrade to both Volvo Tamd41 engines following a gearbox failure on our customers Aqua star as the old gearbox was no longer serviceable. We also installed 2 new ZF45A gearboxes complete with new drive plates and oil coolers.

We replaced all engine mounts, new prop shafts, new cutlass bearings and sent the props off for refurbishment which included re-pitching of the props to allow for the new gearbox ratio. A full engine service was also carried out including valve clearance and the heat exchangers were removed for cleaning. Following successful sea trials the customer can now use their boat in time for the summer season.

MPP Engineering
MPP Engineering

Volvo D12 Engine service

Carrying out a full engine service including valve clearance on a pair of Volvo D12 s on a Fairline squadron 50.

MPP Engineering
MPP Engineering

MTU 2000 12v M93: Annual service work.

Annul service work carried out on a pair of 12V M93 2000 series engines. Works carried out included Engine oil and filters, Fuel filters, Valve clearance, Centrifugal filters, crankcase filters, and oil sample testing.

MPP Engineering

MTU 12V2000 M70: QL3 works/ Top End overhaul

We carried out major service works on a pair of MTU 12V 2000 M70 engines fitted to a 36 Meter yacht. Works carried out included renewal of all cylinder heads, injectors, high pressure pumps, fresh and raw water pumps, low pressure fuel pump. And overhaul of the turbo`s. Followed by a successful sea trial all carried out in the south of France.

MPP Engineering
MPP Engineering
MPP Engineering
Chat on WhatsApp